NOT ONLY TV Digimedia Player (LV-234)

Q1: Does LV-234 like previous models have auto run (auto play) option?

G-Space GS-R238 GPS Bluetooth receiver

Q1: Do I need to install driver for GS-R238?
Q2: Where will and where will it not work?
Q3: If I forget to bring car charger and battery drained out, what can I do?
Q4: How long does it take before GS-R238 get signal?
Q5: Can I use USB cable to connect laptop / car computer for GPS signal transmitting?
Q6: If I know the place I am going to or the place I live get weak GPS signal, anything I can do to enhance signal?
Q7: What's the symbol / LED light indicator on GPS means?
Q8: Why I can't connect GPS receiver with my PDA?

SPECTEC SDC 001A /003 SD Camera

Q1: Does the SDC series SD camera support my PDA?
Q2: How to let SDC series SD camera work with my iPAQ 19/22 series PocketPC?
Q3: Which iPAQ PDA models need to ROM update?
Q4: Which Palm PDA models need to ROM update?
Q5: I can't  find photos / movie clips that I transferred to my pc, where are they?
Q6: Path to download SPECTEC applications.
Q7: How should I know that camera driver / application is installed properly?
Q8:  Where can I find out more information?
Q9:  What is the right way to remove SD card / SD camera from my PDA?

SPECTEC SD WiFi Card

Q1: Does SD WiFi wireless network support my PDA?
Q2: Does SD / mini SD WiFi card need any driver?
Q3: Driver Installed properly, but I still can't get in to internet, why?

FlyJacket i3800

Q1: What is FlyJacket?
Q2: Does FlyJacket compatible with my Compaq iPAQ PPC?
Q3: I have connected a projector to the FlyJacket i3800, but there is no display. Why?
Q4: After pressed Page Up / Page Down buttons on the pen-sized remote control, but nothing happened, why?
Q5: What will be happened to the FlyJacket drivers if I perform a hard reset on my iPAQ?
Q6: Will the FlyJacket i3800 be able to output to my flat panel LCD monitor?
Q7: Is it possible to capture still images using the FlyJacket i3800?
Q8: Is it possible to record full motion video using the FlyJacket i3800?
Q9: Can I access data stored on a CompactFlash card while using the FlyJacket i3800?
Q10: Does the FlyJacket i3800 require connection to a power adapter during operation?
Q11: Will the FlyJacket i3800 drain power from the iPAQ main battery?
Q12: Is it possible to connect my camcorder and output video to my TV simultaneously using the FlyJacket i3800?
Q13: How long can I expect the FlyJacket i3800 battery to last on a full charge?
Q14: Is it possible to use presentation or image viewing applications other than those included in the IA PowerMedia Suite?
Q15: Can I preview video full-screen on my iPAQ?
Q16: Is there a presentation tool included in the FlyJacket i3800 package?
Q17: Why is the iPAQ performance so slow when connected to the FlyJacket i3800?
Q18: I can't get my remote control device to work.
Q19: It takes several seconds for the slide to advance during a slideshow on IA Presenter when I use the infrared remote control.
Q20: If have connected a camcorder / VCR to the FlyJacket, what application do I use to preview video?
Q21: I keep getting error messages when trying to connect a Microdrive™
Q22: There is "flickering" or "noise" on the VGA display.
Q23: Why does the battery meter on the PowerShow application indicate an incorrect value or none at all?
Q24: If I power off my iPAQ, will it also shutdown the FlyJacket i3800?

IA PowerMedia Suit

Q1. Is it possible to install IA Style® PowerMedia Suite on a Secondary Storage card?
Q2. An error message appears when I try to "drag-n-drop" an MS PowerPoint® presentation file to my iPAQ.
Q3. How do I use IA Presenter to output to VGA?
Q4. Two presentations appear, a full screen and a smaller display version, when I open my PowerPoint® file in IA Presenter.
Q5. When I use IA Presenter, the slide appears cut-off on the projector screen or LCD monitor, what should I do?
Q6. How do I use IA Album to output to VGA / Television?
Q7. When I use IA Image Capture, the video preview display screen will 'freeze' after I capture an image.
Q8. I have converted a PPT file to IAP file format, but when I try to use IA Presenter to open the file, I see the error message: "10200:1000:10 File format is not valid".
Q9. When I copy-paste my PPT file to my iPAQ, it still PPT, not IAP file why?
Q10. What applications support remote control?

TVWalker Hybrid

Q1. Why I can watch DVB-T TV picture, but no sounds?
 

TransPad TP-705

Q1: Why I got warning message: "No IrDa connection! Drawing is NOT allowed!"?
Q2: Why my TransPad not work with my PocketPC?
Q3: Why battery power drains even not in use for few days?

PKB-800 Thumboard

Q1: What should I do when I type on PKB-800 but nothing happened? Am I do anything wrong?
Q2: The keyboard icon is already appeared on application list and the keyboard driver is enabled , but it still nothing happened when I type on the Thumb Board, why ?
Q3: How do I verify my Palm Operation System version?
Q4: How do I verify my PocketPC (Windows CE) Operation System version
Q5: Why the 4 hard keys act different from the function printed on the panel?
Q6: What should I do when I type on PKB-800 and nothing happened? is that because of any wrong hardware installations ?
Q7: What should I do when I type on the Thumb Board but nothing happened? I used it for a while and running fine before, should I replace battery ?
Q8: Any limitation on circumstance when using PKB-800 ?
Q9: Can I still install PKB-800 driver when another brand’s keyboard driver already inside my PDA ?
Q10: How to remove PKB-800 driver from my PDA ?

LV-234

A1: Yes, please go to our download page to download latest firmware for LV-234, which have auto run options like our previous models.

 Installation procedure:
   Download latest firmware from here
   Un zip and copy the only one file in to an empty SD memory card through your computer or card reader. Note: we strongly recommend you to format SD card and scan this card to ensure no virus affected before upgrade.
   Insert SD card into Digimedia Player (LV-234), then power on. 
   Using remote control provided and select to Photo from "Main Menu"; The upgrade procedure should starts automatically.  Please see photos step  1, 2, 3

A7. Is it possible to capture still images using the FlyJacket i3800?
Yes, capturing still images is possible using either the bundled IA Image Capture or the FlyViewMax application (click here for free download). The IA Image Capture application allows the image to be captured in a choice of 3 file formats -JPEG, BMP and GIF.

A8. Is it possible to record full motion video using the FlyJacket i3800?
Yes, using our bundled IA Capture (FJ) can record full motion video!

A9. Can I access data stored on a CompactFlash card while using the FlyJacket i3800?
Certainly. The FlyJacket i3800 is equipped with a fully compliant CompactFlash slot (Type I /II) that is specifically designed to handle this functionality. That means that you have total access to data stored on any CF Type I or Type II card including presentation files, image files simply by inserting the card into the FlyJacket i3800CF slot.

A10. Does the FlyJacket i3800 require connection to a power adapter during operation?
No, the FlyJacket i3800 does not require connection to a power adapter during operation. When the FlyJacket i3800's internal battery power is drained, charging via the iPAQ power adapter is required.

11. Will the FlyJacket i3800 drain power from the iPAQ main battery?
Never. The FlyJacket i3800 receives its power solely from its internal battery and not from the iPAQ. The FlyJacket i3800's design prevents it from feeding off the iPAQ main battery - even when near empty.

A12. Is it possible to connect my camcorder and output video to my TV simultaneously using the FlyJacket i3800?
No. The FlyJacket i3800 can only perform video input OR video output tasks, but not both simultaneously.

A13. How long can I expect the FlyJacket i3800 battery to last on a full charge?
A reasonable range is between 1.5 to 2 hours providing no power consuming device such as a Microdrive is connected in addition to the display device.

A14. Is it possible to use presentation or image viewing applications other than those included in the IA PowerMedia Suite?
At this time, the FlyJacket i3800 supports video output and video input functionality using the IA PowerMedia Suite only. Additional software applications will be supported in the coming months.

A15. Can I preview video full-screen on my iPAQ?
Yes. To preview video full-screen, simply run the FlyViewMax application (free download) and have a video input device such as a camcorder or VCR connected to your FlyJacket i3800.

A16. Is there a presentation tool included in the FlyJacket i3800 package?
Yes. The FlyJacket i3800 package includes a pen-sized remote control / laser pointer. One end of the pen functions as a laser beam while the opposite end emits an infrared signal to the FlyJacket i3800 to advance or return to previous slides/images when using IA Presenter and IA Album.

A17. Why is the iPAQ performance so slow when connected to the FlyJacket i3800?
When the iPAQ is connected to the FlyJacket i3800, and a program like IA Presenter or IA Album is open, the Flyjacket display drivers are also running in the background. It is this resulting demand on iPAQ's limited memory from multiple programs working that creates processing delays.

A18. I can't get my remote control device to work.
If you are experiencing difficulties with the remote control device, please review the following:

       Make sure that ALL 6 batteries provided were properly inserted.

       
       Remember that the remote control is for use with IA Presenter and IA Album applications for slideshow page up/ down and image advance, respectively.
       The batteries might be low or have insufficient charge. Please purchase a replacement set according to the table below.

A19. It takes several seconds for the slide to advance during a slideshow on IA Presenter when I use the infrared remote control.
It is normal to experience a delayed response. The cause for the hesitation is NOT related to the FlyJacket i3800, rather it involves several other factors (application processing speed, iPAQ memory, file size, etc) involved with processing the 'infrared command'.

A20. If have connected a camcorder / VCR to the FlyJacket, what application do I use to preview video?
Use the IA Image Capture application included in the IA Style® PowerMedia Suite software bundle. Simply go to the Programs menu and tap on IA Image Capture icon to launch the program.

A21. I keep getting error messages when trying to connect a Microdrive™
Please consult the Microdrive? manufacturer's website for information on downloading and installing the latest driver version.

A22. There is "flickering" or "noise" on the VGA display.
These types of display errors occur when old FlyJacket i3800 drivers are installed. Please go here to download the latest version.

A23. Why does the battery meter on the PowerShow application indicate an incorrect value or none at all?
The first release of the PowerShow application had a tendency to display inaccurate battery levels. This error has been corrected in the newer version available here.

A24. If I power off my iPAQ, will it also shutdown the FlyJacket i3800?
No, since the FlyJacket i3800 battery functions independently from the iPAQ battery. To power off the FlyJacket i3800 requires closing the LifeView Shadow application by tapping on the EXIT button or the OK button (upper right-hand corner) from within the program.

IA PowerMedia Suit

Q1. Is it possible to install IA Style® PowerMedia Suite on a Secondary Storage card?

During the IA PowerMedia Suite installation process, a dialog box will appear asking: "Install IA Style® PowerMedia Suite using the default application install directory?" Select No, then another box will appear asking you to "Select Destination Media". Just select Save In Storage Card, and then the program will be saved in the storage card.

Q2. An error message appears when I try to "drag-n-drop" an MS PowerPoint® presentation file to my iPAQ.

Most error messages that appear during your use of the IA Presenter ActiveSync Filter/Converter are actually reported by the underlying Microsoft Office OLE automation libraries called by the IA Presenter Converter. IA Style® recommends that you first check the slides and try to identify what presentation object caused the problem. Deleting and re-generating that object may solve the problem. Completely uninstalling and re-installing MS PowerPoint® might help also.

However, if you are experiencing one of the rare cases in which the above suggestions don't work, and you receive an error message that you don't understand and that does not include any hints for correction, please send an e-mail to IA Style® containing a screen shot of the error message (or type the text of the message, including any numbers that follow the message). Also please tell IA Style® anything that might help IA Style® to duplicate the error, and, if possible, include the PowerPoint® file.

Q3. How do I use IA Presenter to output to VGA?

After inserting your iPAQ into the Flyjacket i3800, connect your VGA display device to the VGA connector: On your iPAQ, tap the Windows Start icon and then tap on Programs from the menu. Locate and tap on the IA Presenter icon. When IA Presenter opens:
   Select the Powerpoint file you wish to view by tapping on it
   Tap the following tabs: Tools | Options | VGA Output.
   Select the FlyJacket Sleeve (VGA Card), VGA (Output to) and your choice of resolution(Mode) and then tap "OK"
   Tap the View tab and select VGA Slideshow to view presentation on your VGA display device.

Q4. Two presentations appear, a full screen and a smaller display version, when I open my PowerPoint® file in IA Presenter.

This will occur in two situations:
   If the LifeView® Shadow application is not 'exited' prior to launching IA Presenter.
   If IA Presenter is launched while the IA Screen Mirror application is running.

Q5. When I use IA Presenter, the slide appears cut-off on the projector screen or LCD monitor, what should I do?

In most instances, using the "Refresh or Auto-Sync" function of the projector will correct this display error. Alternately, access the projector display menu to adjust the Horizontal Position or Vertical Position setting until slide appears correctly.

Q6. How do I use IA Album to output to VGA / Television?

After inserting your iPAQ into the Flyjacket i3800, connect your VGA / Television  to the VGA / 1 to 4 connector: On your iPAQ, tap the Windows Start icon and then tap on Programs from the menu. Locate and tap on the IA Album icon. When IA Album opens:

   Tap the following tabs: Tools | Options | VGA
   Select the FlyJacket Sleeve (VGA device), VGA / Composite (or S-Video) (Output to) and your choice of resolution (Mode) and other parameters, then tap "OK" . Please Note: UK and European countries please choose PAL TV for output to TV!!
   From the View tab, tap Mode and then select VGA Select or VGA Slide Show to view images on your VGA display device; you can use remote control while output to VGA device using "VGA Slide Show" mode!

Q7. When I use IA Image Capture, the video preview display screen will 'freeze' after I capture an image.

This error has been corrected in the latest version of IA Image Capture. Please refer to the IA Style® website to receive the updated version.

Q8. I have converted a PPT file to IAP file format, but when I try to use IA Presenter to open the file, I see the error message: "10200:1000:10 File format is not valid".

The problem you are experiencing is a bug that sometimes shows up in IA Presenter 2.0. IA Style has updated IA Presenter, and as a FlyJacket i3800 owner, you can download and install a new version of the IA PowerMedia Suite (the suite of applications that includes IA Presenter.)

Q9. When I copy-paste my PPT file to my iPAQ, it still PPT, not IAP file why?

IA presenter only can convert PPS file to IAP. Please save your Power Point file to PPS, than copy-paste to your mobile device, you should see IAP file format in your iPAQ.

Q10. What applications support remote control?

Currently remote control supports IA presenter and IA Album under "VGA Slide Show", output through VGA or Video sockets.

NOTE
For further technical questions or support issues relating to any of the 4 programs in the IA PowerMedia Suite, please visit IA PowerMedia Suite website or send an e-mail directly to the IA Style® support team.

TVWalker Hybrid

A1: Go to "Scan" , tick on "Audio" column, For UK territory, please change default setting "1" to "2"; after few moments you should be able to listen sounds.

G-Space GS-R238 GPS receiver

A1: For PocketPC or Palm PDA, you don't need to install any driver for them.

A2: As long as the GPS receiver has a clear view of the sky, it will work anywhere on Earth, accurately reporting your current Latitude, Longitude, heading and speed. However, in order for the GPS data to be correctly displayed on a map, you will need to have the relevant map loaded in to your handheld devices or Laptop / car computer.

A3: We found that NOKIA mobile phone's battery (model No. BL-4C, BL-5C) can be used for  GS-R238 GPS receiver for emergency use. As this is an unofficial test, users takes it's own risk.

A4: After turn on GS-R238, the bluetooth will self-test for 6 seconds. The blue light will blink once per second after self-test complete. And now you can connect your PDA to GS-R238.

A5: No, the USB cable included is for battery power charging only. For data transmission, please contact your retailer for "Mini-USB to USB cable (UART interface) with driver" !

A6: Yes, we have external GPS MMCX antenna for GS-R238. Please contact your retailer for more information!!

A7:

 A8: For first time setup GPS with your PDA, please turn on GPS receiver first for few seconds for initialization; after the Orange LED blinking, then turn on PDA and switch on Bluetooth to connect with GS-R238 GPS receiver then open your GPS map software (i.e. TomTom). For more information about how to connect TomTom with GS-R238, please refer TomTom  support website.

TransPad TP-705

A1: Most of time is due to your TransPad battery power low, please replace new 2 x AAA batteries  to your portfolio and click "Relink" to try again!

A2: In most occasion due to your PocketPC's IrDa set to automatic receive. Please disable auto receive: "Setting"->"data exchange setting", uncheck "automatically  receive".

A3: We suggest  users take batteries out from portfolio when not in use. There is a small bag on the left and it is a good place to put batteries when not in use!

Spectec SD Camera (300K / 1.3M)

A1: Both SDC-001A / SDC-003A support most of Palm / Pocket PC which have SDIO slot! The Compatibility Chart shows most recent PDAs which been tested and working properly.

A2: Some iPAQ need to upgrade their SD driver to SDIO. Please note, before upgrade, please backup your data from iPAQ to desktop, and check your iPAQ BIOS/driver version before you install, yours may upgraded already:

iPAQ 1940 / 1945: http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22218.html

iPAQ H2200 series: http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/20674.html

A3: iPAQ 1940 / 1945: http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/20508.html

iPAQ2200 series: http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/20566.html

iPAQ 3970 / 3975: http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/17002.html

iPAQ 3950 / 1955: http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/17346.html

iPAQ 5400 series: http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/19957.html

A4: Palm Tungsten E handheld: http://www.palmone.com/us/support/downloads/tungstene/sdioupdate.html

Palm Tungsten W handheld: http://www.palmone.com/us/support/downloads/tungstenwBT.html

A5: Path to find photos & Video/Movies download:

For Pocket PC: C:\Documents and Settings\USER\My Documents\PhotoView\MyPhoto

For Palm: C:\Program Files\Palm\test01\ViewTake Photos

A6: Path to download --- Pocket PC:

C:\Program Files\SPECTEC\Photo View

A7: After software installed properly, the following 3 easy steps can identify does camera is ready working for you:

1: you should see the software icon on PDA:--- Pocket PC: Photo View / Palm: View Take.

2. When SD Camera slot into SD slot, the green light on the top of camera should on.

3. After SD camera slot in, the appropriate program should run automatically.

A8: To find out more information, please see Quick Guide / User Manual in electronic document in CDROM, under User Manual folder.

Or view on-line: http://www.spectec.com.tw/en/sdc-001a.htm

A9: DO NOT pull out any SD devices, including SD camera, directly. It will cause damage to the pin of SD slot in your PDA. Please push down lightly on the camera and the camera will jump up from your PDA.

Spectec SD / mini SD WiFi Card

A1:  Spectec WiFi card supports most of PocketPC / PDAPhone devices which running PPC 2003, PPC 2003SE & WM5.0.  Some users may found their device meet the hardware requirement but still can't get online via WiFi connection, like T-Mobile blocked MDA Compact II, it's due to T-Mobile blocked the function, please contact T-Mobile for further details. 

A2: Yes, the 8 cm CDROM driver is inside the package, between the paper card. Please double check you installed driver before you insert WiFi card.

A3: After driver installed, please check WiFi setting in your handheld device, if signal strong but can't connect to web site, please configure it with your WiFi AP/ router or consult your network administrator.

Thumboard PKB-800

A1:   Please check and make sure the keyboard icon is appeared on the application list after completing the driver installation.

  Don’t forget to tap “Enable keyboard “ to turn on the keyboard driver .

A2: Please double check you installed appropriate driver for your PDA. If you have installed with wrong driver (e.g. PPC 2002 PDA but installed PPC 2003 Driver), just uninstall the incorrect driver; and then install the right one.

A3: Please follow the direction below:

  You can see Palm OS software version here.

Note: The version information might bit different on your PDA: you can also have a look on PDA user guide. If you cannot get version information by this direction, please contact your PDA vender or visit Palm’s website http://www.palmone.com/.

A4:

   Go “ Start -> Settings “.

   Select “ System “ middle down your screen.

  Click “About”

You can see PocketPC (Windows CE) OS software version

A5: Our “Function Panel “ is double sided printed, one side printed for Palm OS PDA function, the other side printed for Pocket PC functions. You may try to remove and flip it to change to the appropriate system.

A6:

   Please ensure the connection cable is connected between PC and PDA

   There are 11 possible locations for IR emitter to installed , choose the most suitable location to install , from whether the keyboard’s IR emitter is directly over the IR port on your PDA

A7: Check whether the battery low? and make sure the battery has been correctly installed .

A8: Sometimes a strong light might caused incorrect signal, Please prevent typing under strong light.

A9:

   Yes, you can install PKB-800 driver and another IrDA keyboard driver on same PDA , but you have to “ Disable “ other driver from it’s utility first . In same rule you have to disable PKB-800 driver before you use other IrDA keyboard.

Note: Users need to disable IrDA device manually, when there are more than one IrDA devices on your PDA.

A10:

For Palm :

  Click Clock left top on your screen.

  Select “ App -> Delete “.

  Select “ Keyboard “.

  Click “ Delete ” middle of bottom to remove it from your system.

For Pocket PC

  Go “Start -> Settings “.

  Click “System” left down your screen.

  Click “ Remove Programs “

   Select “Portable Ir-Keyboard” and click delete to remove it

eN Series VoIP Products

A1. The Default username is "admin" and password is "admin". For security reason, please change the password to protect your gateway against hacker attacks.

A2. Press "Reset" button on the rear panel for more then 5 seconds to reset all settings back to default settings.

A3. The default WAN IP address is 192.168.1.1 with subnet mask 255.255.255.0.

  The default LAN IP address is 10.10.10.1 with subnet mask 255.255.255.0.

A4. Check the DNS server settings on your PC. You should get the DNS servers settings from your ISP. If your PC is running a DHCP client, remove any DNS IP address setting. As the router will assign the DNS settings to the DHCP-client-enabled PC.

A5. The build-in DHCP server supports 253 IP addresses for local area network (LAN).